Black Ops 7 Rex Infernus Forge Panels are the breakable seals used when repairing the Nexus Forge during the Main Quest. This step comes after upgrading the normal Void Claw into the stronger Void Talon, because the standard grapple cannot clear the full panel sequence required by the repaired Forge state.
The practical Black Ops 7 Rex Infernus Forge Panels count is 15. Three sit around the upper Forge rings and 12 are inside the Nexus Core, split six on each side. After those seals are cleared, the lower Forge opens and the webbing behind it must also be destroyed before the crank and floor-lever interactions can finish the repair.
Black Ops 7 Rex Infernus Forge Panels: quick answer
- Upgrade one grapple station to obtain the Void Talon
- Break 3 panels around the upper Forge rings
- Enter the Nexus Core
- Break 12 more panels, six on each side
- Clear the webbing exposed behind the lower Forge sections
- Turn the Forge crank wheels again
- Use the floor lever beneath Pack-a-Punch
- Use the repaired controls to align the beam with a Shadowsmith temple
Black Ops 7 Rex Infernus Forge Panels is easiest to handle when you treat the steps above as one sequence rather than separate mysteries. The details below explain where each interaction happens, what actually advances the objective and the mistakes that most often waste a round.
Get the upgraded Void Talon first
The Black Ops 7 Rex Infernus Forge Panels repair route assumes the Main Quest has already taken you back through Her House to upgrade a grapple station. That upgrade applies to the station you choose, not every green pedestal on the map, so remember which station gives the stronger Void Talon.
A basic Void Claw remains useful for movement, but the panel-clearing step is built around the upgraded tool. If panels are not responding, confirm that you picked up the Talon from the empowered station rather than grabbing a normal Claw somewhere else.
Black Ops 7 Rex Infernus Forge Panels: Break all 15 seals
The main Black Ops 7 Rex Infernus Forge Panels count is 15. Three are positioned around the top of the Nexus Forge across the inner, middle and outer ring. The remaining 12 are inside the Nexus Core, with six on each side and two associated with each door area.
Move methodically rather than counting from memory in a crowded round. Clear the upper three first, then sweep one full side of the Core before crossing to the other. When the sequence is complete, the lower sections open and expose the next obstacle instead of leaving a hidden panel behind.
Clear the Forge Engine webbing and lock the repair
Behind the opened lower Forge sections, destroy the webbing blocking the mechanism. Season 6 specifically addressed issues around the Forge Engine and fire damage, so use a reliable damage source rather than assuming the web is decorative.
After the webbing is gone, use the crank wheels to surge the Forge again and interact with the floor lever beneath Pack-a-Punch. That locks the repaired state and opens the alignment controls used to aim the Forge beam toward each Shadowsmith temple during the cleansing chain.
How to spot the missing panel problem
If Black Ops 7 Rex Infernus Forge Panels does not progress after a sweep, do not immediately repeat the earlier Wonder Weapon build. Recheck the three upper rings and then the 12 Core positions. Missing one panel is enough to keep the lower mechanism from entering the next state.
The Season 6 patch also fixed several Forge-related progression issues. If every visible seal is gone and the live build still refuses to advance, confirm the game is updated and test the step in a fresh round before assuming a different quest condition is missing.
Black Ops 7 Rex Infernus Forge Panels: common questions
How many Forge Panels are there?
There are 15 seals in the repair step: three around the upper Forge rings and 12 in the Nexus Core.
Do I need the Void Talon?
Yes. Use the upgraded grapple station from the Main Quest and make sure you actually picked up the Talon rather than a normal Void Claw.
What do I do after the panels break?
Clear the exposed webbing, surge the Nexus with the cranks and use the floor lever beneath Pack-a-Punch.
What does repairing the Forge unlock?
It enables the beam-alignment controls used to point the Nexus toward the four Shadowsmith temples.
Black Ops 7 Rex Infernus Forge Panels: what to remember
Black Ops 7 Rex Infernus Forge Panels are best treated as a checklist. Clear the three upper seals, sweep all 12 Core seals, remove the exposed webs and then finish the crank-and-lever sequence. Once the repaired Forge is locked in, the temple-cleansing portion can begin.
The useful way to approach Black Ops 7 Rex Infernus Forge Panels is to follow the live interaction order, watch for the game-state cues described above and retry a failed step on the next round rather than forcing an old or pre-launch solution into the current build.
Official source: Call of Duty official Rex Infernus information.
