Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20 is usually caused by the first oak hand-in failing to register. The current nerfed secret only opens the snow-biome passage when oak has already been placed completely inside the Hunt NPC trash bin.
If you skip that trigger, use the wrong bin or leave part of the oak sticking out, snow wood at the boulder gap will do nothing.
Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20: fastest fix

- Return to the Hunt NPC near the starting shop area.
- Cut a fresh piece of oak wood.
- Place the entire piece inside the NPC trash bin.
- Wait briefly for the hand-in.
- Travel to the snow biome.
- Cut fresh snow wood.
- Place it in the narrow boulder gap.
For Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20, restarting from the oak trigger is more useful than repeatedly dropping snow wood into a closed crevice.
Use the correct event bin
Geck’s large collection bin belongs to the normal 2015 quest. The hidden route uses the separate trash bin beside the Hunt NPC.
Oak placed in Geck’s meter bin does not replace the secret trigger.
Put the oak completely inside
The wood should sit fully inside the container rather than balancing on the rim. Use a smaller section if an oversized piece will not fit cleanly.
This is the most common reason a correct-looking snow stage fails.
Collect fresh snow wood after fixing oak
Once the oak is definitely registered, travel back to the snow biome and cut another snow tree.
Using a fresh piece makes it easier to know the retry follows the current sequence from start to finish.
Find the correct boulder crevice
The secret door is a narrow gap between boulders and cliff walls in the snowy region. Place the snow wood in that gap.
If Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20 continues after a clean oak hand-in, change servers and repeat the two wood stages in order.
Do you need the old Strange Bag route?
Not for the nerfed live version. Strange Bag, TNT, the cave skeleton and glorbs belong to the original harder solution.
The current secret has been shortened to the oak trigger followed by the snow-wood door.
The door opens but S10 does not update
Walk through the hidden passage and complete the interaction inside. Opening the rocks is only the access step.
Then return to a fresh Hunt hub. If the game badge exists but S10 is dark, refresh the hub before repeating the wood route.
Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20: full checklist
- Geck completed.
- Current server joined.
- Oak used first.
- Correct Hunt NPC trash bin used.
- Oak fully inside the bin.
- Snow wood collected second.
- Correct boulder crevice used.
- Hidden interaction completed after the door opens.
The practical answer to Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20 is the order: oak fully inside the Hunt NPC bin first, snow wood in the boulder gap second.
Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20: should you redo Geck?
Usually no. If the normal 2015 quest already shows complete, restart from the hidden oak trigger instead of refilling Geck’s entire meter.
How to tell whether the first trigger worked
There is no big progress meter for the hidden oak hand-in, which is why the failure can be confusing. The safest approach is to use a small oak piece, place it well below the rim of the correct bin and pause before leaving the area.
If the snow-biome gap stays unchanged afterward, treat the oak as unregistered and repeat that exact hand-in on a fresh server before testing unrelated Lumber Tycoon 2 mechanics.
That keeps Lumber Tycoon 2 Secret Door Not Opening in The Hunt Roblox 20 troubleshooting focused on the stage that actually controls the secret door.
