Lumber Tycoon 2 Hunt NPC Trash Bin Location is beside the Hunt 20 NPC near the starting Wood R Us area. This is the container used for the oak trigger in the current secret quest, and it is not Geck’s normal collection bin.
Putting oak into the wrong event bin will not arm the nerfed S10 route. The secret expects one oak piece completely inside the Hunt NPC trash bin before the snow-wood stage.
Lumber Tycoon 2 Hunt NPC Trash Bin Location: where to look

Spawn near Wood R Us and the event area used by the normal 2015 quest. Find the Hunt 20 NPC positioned near the shop and look directly beside that character for the secret trash bin.
Do not stop at Geck’s larger collection container. Geck advances the normal quest meter; the Hunt NPC bin is the hidden oak checkpoint.
What wood goes in the Hunt NPC bin?
Use oak. Chop an ordinary oak tree, keep one manageable section and carry it back to the NPC.
You do not need to fill a second meter. One properly accepted oak piece is the important trigger.
How to make the oak register
Place the entire wood piece inside the bin. It should not rest on the rim or hang outside.
For Lumber Tycoon 2 Hunt NPC Trash Bin Location, smaller oak pieces are easier because you can see whether the entire section fits inside.
Wait briefly after dropping it in before leaving for the snow biome.
Hunt NPC bin vs Geck bin
| Container | Purpose |
|---|---|
| Geck’s large wood bin | Normal 2015 Hunt objective; fill the progress meter. |
| Hunt NPC trash bin | Secret S10 trigger; place one oak piece fully inside. |
Using the correct container is the key difference between the normal quest and the hidden route.
What happens after the oak hand-in?
Travel to the snow biome and cut a snow tree. Keep one piece and take it to the narrow boulder crevice.
Placing the snow wood in the gap opens the passage when the oak trigger is active.
Oak wood not counting
If the secret door later refuses to open, assume the oak failed until proven otherwise. Return to the Hunt NPC and repeat the hand-in with a smaller fresh piece.
Make sure the oak is not beside the bin and is not inside Geck’s normal container.
Why older videos do not show this bin
First-day S10 videos used a Strange Bag, TNT, a skeleton NPC and a glorb puzzle. The current simplified route replaced most of that work.
That is why Lumber Tycoon 2 Hunt NPC Trash Bin Location may be missing from older walkthroughs even though it is central to the live version.
Lumber Tycoon 2 Hunt NPC Trash Bin Location: quick route
- Complete Geck.
- Cut oak.
- Return to the Hunt 20 NPC.
- Place the oak completely inside the trash bin beside the NPC.
- Wait for the hand-in.
- Travel to the snow biome for the snow-wood stage.
The key to Lumber Tycoon 2 Hunt NPC Trash Bin Location is recognising that the hidden route uses a different container from the main quest.
Can any size oak piece work?
The event route only needs a usable oak piece, but a smaller section is safer because it fits completely inside the bin.
Why this Lumber Tycoon 2 bin causes confusion
The normal event teaches players to watch Geck’s large collection bin, so it is natural to return to the same container when the secret asks for wood. The nerfed hidden route deliberately uses a different NPC and a different bin.
That makes location recognition part of the puzzle. If the container has Geck’s normal progress meter, you are solving the main quest rather than activating the secret oak checkpoint.
The Lumber Tycoon 2 Hunt NPC Trash Bin Location matters because the secret bin is different from Geck’s normal event container.
For Lumber Tycoon 2 Hunt NPC Trash Bin Location, accuracy matters more than carrying a large or valuable log.
