How to Build a Rain Collector in Project Zomboid Build 42

how to build a rain collector in Project Zomboid
Official Project Zomboid image. Credit: The Indie Stone.

Here’s how to build a rain collector in Project Zomboid Build 42 without making three trips back to the shed. For the basic crate, you’ll need Carpentry 3, four planks, four nails, four garbage bags or a tarp, and a hammer. The larger barrel unlocks at Carpentry 5 and holds more water, so there’s a reason to keep practising Woodwork.

A collector is one of those projects that doesn’t seem urgent until the day you discover the kitchen sink has run dry. If you’ve been relying on leftover tap water, getting a barrel in place early means you can start building a reserve without making daily trips to a river. Just remember that collected rainwater may still be tainted and need purification before drinking.

How to build a rain collector in Project Zomboid: which type?

how to build a rain collector in Project Zomboid
Rain collectors make a farmhouse far easier to live in after water shutoff. Official Build 42 farmhouse screenshot: The Indie Stone.

Build 42 has smaller and larger collectors. The basic Rain Collector uses Carpentry 3, planks, nails and a waterproof lining such as garbage bags; the larger round Rain Collector Barrel is a higher-tier build, typically at Carpentry 5. The basic crate holds about 400 litres; the larger barrel holds about 600 litres. The bigger model is useful if you don’t want to keep topping up a tiny reserve, though a crate is perfectly adequate to get started.

For the round barrel, current Build 42 recipe data lists six planks, five nails and either four garbage bags or a tarp, along with a suitable hammer. The smaller collector uses four planks, four nails and four garbage bags or a tarp. The barrel holds more water but costs more wood and nails. Check the building menu if you’re using mods or a different server build.

Where to put your rain collector

Place it in an exposed outdoor position where it can actually collect rain. A roof above it or an indoor tile won’t do you much good. It’s also worth thinking about access: a barrel on the edge of a dangerous road is far less convenient than one you can reach from your safehouse without crossing a zombie-filled street.

I would start with a simple collector outside the house, then build a bigger barrel once the Carpentry and materials are available. If you’ve got a growing vegetable garden, consider placing enough storage nearby that you don’t spend every day walking back and forth with a tiny bottle.

How to connect a rain collector to a sink

how to build a rain collector in Project Zomboid
Rainwater can help keep crops watered, but collected water needs careful handling. Official Build 42 crops image: The Indie Stone.

For a plumbed sink, the usual Build 42 arrangement is surprisingly specific. The collector needs to sit one level above the sink, either directly above it or within the eight neighbouring tiles on that level. That’s a 3-by-3 area, not a pipe that can run across the whole roof.

The sink itself must be indoors or in a properly constructed safehouse. With a pipe wrench and water in the source, interact with the sink and look for the plumbing option. If the option is missing, check the room, the level difference and whether the collector has any water. Moving the barrel to the same floor as the sink won’t solve it.

Connecting a sink is a convenience, not a reason to stop checking water safety. Build 42 patches and different setups have produced conflicting claims about whether the output is purified. Check what the water is actually labelled before drinking, and boil anything tainted if necessary.

Why the collector isn’t filling

First, has it actually rained since you placed it? A new barrel won’t magically come with stored water. Then check that it’s outside and not covered by an overhang. If the container is already full, it won’t take more. Weather, capacity and placement all matter more than how tidy the barrel looks beside your house.

If you moved the collector after plumbing it, the sink’s source search may no longer find it. The indoor sink checks the tiles immediately above, so even shifting the barrel a couple of squares can break the arrangement. Put it back within range and recheck the connection.

Is rain collector water safe to drink?

Not automatically. Rain is a dependable way to collect water, but collected water can be marked Tainted. Heat it in a suitable container until the warning clears, or use a supported purification method. If you’ve only just survived your first week, a spare cooking pot may be a more important purchase than building a second barrel.

Once the crate is working, you can decide whether a bigger barrel or a plumbed sink is worth the extra effort. Just keep the water’s tainted status in mind. Having a tap that works after shutoff is wonderful, but it doesn’t make questionable water safe by magic.

Official source: The Indie Stone’s Build 42 building and survival overview.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *