Genshin Impact: Splice the Evermotion Mechanical painting together finale guide
With all the other puzzles out of the way, its time to splice the Evermotion Mechanical painting together in Genshin Impact, here’s how.
How to Splice the Evermotion Mechanical painting together for the finale
To get a start on the Evermotion Mechanical painting finale and your goal to Spilce the Evermotion Mechanical painting together again, you’ll find it easiest to start with a corner and work onwards from there. I started from the bottom right corner, which meant that I ended up placing Meadow in position 6.
The sky pieces are a bit harder to figure out due to how many different angles they could be spun into, so if you want to solve the puzzle on your own I’d still recommend starting on the lower level regardless. If you’re still reading though, I can only assume you want a bit more help to splice the Evermotion Mechanical painting together.
Using the angle of the green-ish surface in the pictures, it is possible to easily figure out how to align the bottom half of the picture quite quickly. The picture titled lonely should end up in position 5, while the part listed next to Meadow should take up position 4.
You may need to spin these pictures around a bit to get them to line up correctly, but if you focus on the greenish land outline in the foreground it’s quite easy to see how they should align with each other.
Even better though, having the lower half of the painting sorted makes figuring out the sky section much, much easier. You can see the slightly visible lines in the middle section from the lower half, making it easy to pinpoint which tile is meant to take up the middle section. Specifically, you’ll want to drop Part: Sky, into position 2 to make a start on the upper half of the Evermotion mechanical painting finale
READ MORE: Genshin Impact: Evermotion mechanical painting part restoration 4 solution
Once again, a bit of rotation might be required to get it the correct way around for the overall picture.
Part: Cloud is the next one to fall into place thanks to our last move, as the lines in the sky and partially visible comet line up with this picture perfectly. Leaving Part: Cloud to slot into position 3.
With only one piece left to go, the final step to Splice the Evermotion Mechanical painting together should have become fairly obvious; all you need to do now is slot part: Breeze into position 1, and you’ll be done with the last of the Evermotion Mechanical painting challenges.
I was personally expecting the Evermotion painting puzzle event to draw to a close after part restoration 6, so this extra step for some bonus Primogems and the painting as a teapot decoration reward was quite a nice surprise to end the event on.
In any case, that’s it for our guide on how to Splice the Evermotion Mechanical painting together again. If you’ve somehow ended up here without doing the previous steps, you might want to check out our Genshin Impact section for the rest of the Evermotion mechanical painting solutions that you’ve missed out on.
The entire series from the first few puzzles through to the final step of the Evermotion mechanical painting finale, the effort to Splice the Evermotion Mechanical painting together is a bit to work through, but we can’t really complain with the amount of free Primogems involved.
